Shafts / 【JOKER DRIVER】["Carbon"] jos0111
( 1 )

Main image of this product.

SPEC

Category Carbon Shafts
Maker JOKER DRIVER
Materials Carbon
JOKER DRIVER
["Carbon"] jos0111
PRICE： JPY11,000
Expected：USD 72.44

Expected at JPY 151.83 for 1 USD.

This exchange rate is the closing price of yesterday ( 10/14 ).

The actual exchange rate will be determined when the order is paid.

Sold Out

jos0111

Color

Product information

ZERO-CARBON SHAFT

The CARBON shaft proposed by JOKER DRIVER is a hot topic even before its release.
This shaft has many possibilities in the future.
Why don't you try this shaft with infinite possibilities while you still can?

[When the shaft is mounted on the barrel, the shaft will not be used.]
When attaching the shaft to the barrel, please do not hold the carbon part tightly with pliers. (We do not accept any return or exchange for any damage caused by the above handling.) When replacing the spare parts, please insert the parts parallel to the carbon part. When replacing the spare parts, please insert the parts parallel to the carbon part. ・If you cannot insert the parts deeply by hand, please insert them slowly by holding them with a cloth.

[spec] Material:CARBON
Material:CARBON

[Length&Weight]
2-18.0mm・0.66g(S)
3-24.0mm・0.73g(IL)
4-28.5mm / 0.77g(IL)
5-31.0mm / 0.79g(M)
6-35.0mm / 0.84g(ML)
7-38.5mm / 0.87g(XL)
8-41.5mm / 0.9g(XXL)

Flight side top portion/0.32g
Barrel side threaded part / 0.21g

3 shafts, 3 spare parts each for front and rear, special remover x 1

Weight may vary slightly depending on measurement method and environment. The weight may vary slightly depending on the measurement method and environment. Please understand that the weight may vary slightly depending on the measurement method and environment.


The weight may vary slightly depending on the measurement method and environment.

Shaft length is the length from the base of the flight (excluding the threaded part).

Japan Review

5.00

1 Reviews

 1
0
0
0
0
Sort By : Top reviews | Most recent | Highest Rating >> All Review View
Sort By :

2015-05-18

I am using XXL.
Some of you have commented that the flight doesn't change.
I think the timing of the flight change will change.
（I think the timing of the flight change will be the same, but it will not change if you use a lighter shaft.)
After all, it is light! This lightness allows the parallelism of the flight to be corrected during the flight.
The lightness of the shaft allows the parallel correction of the flight to begin earlier in the flight.
This lightweight shaft makes the flight more linear. This is more pronounced with longer shafts.
If you have a problem with the stability of the landing of the ball, you may want to try the XL or XXL shafts.
I think it would be a good solution for those who have trouble landing a ball with a mountainous shape.
It is cool above all.

2 people found this helpful